If you’re new to ready mix concrete, you’ve saved yourself the job of mixing it yourself because it arrives already prepared, which takes a lot of the pressure off. You just need to focus on timing, access, and getting it placed properly before it starts to set.
What ready mix actually means
Ready mix concrete is batched at a plant and delivered to you in a mixer lorry, already combined to the right specification. That means you don’t have to worry about whether you’ve got the mix right. If you’re ordering concrete Cheltenham, this is the easiest route you can take for anything beyond very small jobs. It’s consistent, reliable, and saves a fair bit of effort on site.
Getting your site ready
Once the concrete arrives, you don’t have much time, so make sure your formwork is in place and your tools are ready. Make sure you’ve got a clear path for the pour as well. If access is tight, you need to think about using barrows or a pump in advance.
Ordering the right amount
It’s always a bit of a balance. Order too little and you’re stuck mid job, too much and you’ve wasted money. Most suppliers can help you calculate what you need.
Specialists such as https://www.monstermixconcrete.co.uk/concrete-cheltenham are useful for working out volumes and understanding what’s suitable for your project.
Pouring and finishing
When it arrives, you need to guide it into place and spread it evenly. Take your time levelling and smoothing – that’s what makes the difference in the final result.